販売およびお問い合わせ: 0415 274 753

Pillar Pods to suit Toyota Landcruiser 79 Series and Troop Carrier

$100.00
税込 次精算時に配送料を算出。

These ABS plastic pillar pods mount directly in place of your existing pillar cover — no drilling, no permanent modification, no mess. They come as a set, sit flush and look like they belong there, because they're designed specifically for the 79 Series and Troop Carrier pillar profile.


Key Features

  • Designed specifically for Toyota Landcruiser 79 Series and 78 Series Troop Carrier A-pillar
  • Direct replacement fit — mounts in place of existing pillar cover, no drilling required
  • Quality ABS plastic construction — durable, heat-resistant and paintable if desired
  • Sold as a set — both sides included
  • Ideal for mounting gauges, switches, UHF mounts, driving light controls and accessory switches

Important Airbag Compatibility Note!

These pillar pods are NOT compatible with vehicles fitted with pillar-mounted side airbags.

Toyota Landcruiser 70 Series single cab variants from approximately 2016 onwards received an ANCAP safety upgrade that includes pillar-mounted airbags. If your vehicle has this airbag system, fitting aftermarket pillar pods will obstruct airbag deployment and create a serious safety risk. Do not fit these pods to any vehicle with pillar airbags under any circumstances.

If you are unsure whether your vehicle has pillar airbags, check your owner's manual, look for airbag warning labels on the pillar trim, or contact your Toyota dealer with your VIN before ordering.


Vehicle Compatibility

Suitable for:

  • Toyota Landcruiser 79 Series — Single Cab Ute and Double Cab Ute (pre-airbag upgrade variants)
  • Toyota Landcruiser 78 Series — Troop Carrier

Not suitable for: 70 Series single cab variants from approximately 2016 onwards fitted with pillar airbags as part of the ANCAP safety upgrade. Confirm your vehicle's airbag configuration before ordering.


Installation Notes

Installation is straightforward and reversible. Remove your existing A-pillar cover, route any wiring behind the pillar before fitting, then clip or fasten the pod in place using the existing mounting points. No permanent modification to the vehicle is required. Keep your original pillar covers — they can be refitted if needed.

Again: confirm your vehicle does not have pillar airbags before fitting. This is a safety-critical check, not optional.

安心・安全

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

あなたの支払い情報は安全に処理されます。当社はクレジット カードの詳細を保存せず、お客様のクレジット カード情報にアクセスすることもありません。

今すぐ購入し、Shop Pay で後で支払う

ワークショップサービス、新品および中古部品

当社のワークショップは、クラシックなランドクルーザー コミュニティに幅広いサービスを提供しており、ほぼ独占的に 40 および 60 シリーズ ランドクルーザーを扱っており、販売および購入の検査からディスク ブレーキの変換、モーターの交換、5 速変換などに至るまであらゆる作業を行っています。 Mr Landcruiser は、クラシックなランドクルーザーのワンストップ ショップです。

  • 返金保証

  • オーストラリアへの送料無料

  • 20年以上の経験

Mr Landcruiser

Pillar Pods to suit Toyota Landcruiser 79 Series and Troop Carrier

$100.00

These ABS plastic pillar pods mount directly in place of your existing pillar cover — no drilling, no permanent modification, no mess. They come as a set, sit flush and look like they belong there, because they're designed specifically for the 79 Series and Troop Carrier pillar profile.


Key Features


Important Airbag Compatibility Note!

These pillar pods are NOT compatible with vehicles fitted with pillar-mounted side airbags.

Toyota Landcruiser 70 Series single cab variants from approximately 2016 onwards received an ANCAP safety upgrade that includes pillar-mounted airbags. If your vehicle has this airbag system, fitting aftermarket pillar pods will obstruct airbag deployment and create a serious safety risk. Do not fit these pods to any vehicle with pillar airbags under any circumstances.

If you are unsure whether your vehicle has pillar airbags, check your owner's manual, look for airbag warning labels on the pillar trim, or contact your Toyota dealer with your VIN before ordering.


Vehicle Compatibility

Suitable for:

Not suitable for: 70 Series single cab variants from approximately 2016 onwards fitted with pillar airbags as part of the ANCAP safety upgrade. Confirm your vehicle's airbag configuration before ordering.


Installation Notes

Installation is straightforward and reversible. Remove your existing A-pillar cover, route any wiring behind the pillar before fitting, then clip or fasten the pod in place using the existing mounting points. No permanent modification to the vehicle is required. Keep your original pillar covers — they can be refitted if needed.

Again: confirm your vehicle does not have pillar airbags before fitting. This is a safety-critical check, not optional.

商品を表示