販売およびお問い合わせ: 0415 274 753

Flange Companion Multi Drilled 38MM Seal OD 10 Spline suits 40 Series Toyota Landcruiser 01/1974 - 01/1978

$174.30
税込 次精算時に配送料を算出。

This companion flange suits the front differential, rear differential and transfer case output shaft on the Toyota Landcruiser 40 Series, covering the coarse 10-spline configuration fitted from January 1974 to January 1978. The multi-drilled bolt pattern accommodates both factory bolt spacings without modification, making it the practical choice for replacements where you want to cover your bases on an older vehicle.


Key Features

  • 10 spline — coarse spline configuration, 01/1974 to 01/1978 only
  • 38mm seal OD — confirm your pinion seal size before ordering
  • Multi-drilled bolt pattern — suits 68.5mm x 60mm with 11mm bolt holes
  • Suits front differential, rear differential and transfer case output shaft

Important Fitment Check

Before ordering, verify your pinion seal inner diameter is 38mm. Variations can occur on vehicles where an exchange differential or upgraded diff kit has been fitted — particularly if a later spec pinion has been installed. If your seal ID is 41mm or 45mm, you need a different flange. If in doubt, measure before you order.


Vehicle Compatibility

Suitable for Toyota Landcruiser 40 Series, built January 1974 to January 1978, including:

  • BJ40, FJ40, FJ45, FJ55, HJ45

Fits front differential, rear differential and transfer output shaft positions.


Part Details

Detail Info
Spline Count 10 spline (coarse)
Seal OD 38mm
Bolt Pattern 68.5mm x 60mm, 11mm holes
Application Front diff, rear diff, transfer output
Build Date 01/1974 to 01/1978

安心・安全

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

あなたの支払い情報は安全に処理されます。当社はクレジット カードの詳細を保存せず、お客様のクレジット カード情報にアクセスすることもありません。

今すぐ購入し、Shop Pay で後で支払う

ワークショップサービス、新品および中古部品

当社のワークショップは、クラシックなランドクルーザー コミュニティに幅広いサービスを提供しており、ほぼ独占的に 40 および 60 シリーズ ランドクルーザーを扱っており、販売および購入の検査からディスク ブレーキの変換、モーターの交換、5 速変換などに至るまであらゆる作業を行っています。 Mr Landcruiser は、クラシックなランドクルーザーのワンストップ ショップです。

  • 返金保証

  • オーストラリアへの送料無料

  • 20年以上の経験

Flange Companion Multi Drilled 38MM Seal OD 10 Spline suits 40 Series Toyota Landcruiser 01/1974 - 01/1978
Terrain Tamer

Flange Companion Multi Drilled 38MM Seal OD 10 Spline suits 40 Series Toyota Landcruiser 01/1974 - 01/1978

$174.30

This companion flange suits the front differential, rear differential and transfer case output shaft on the Toyota Landcruiser 40 Series, covering the coarse 10-spline configuration fitted from January 1974 to January 1978. The multi-drilled bolt pattern accommodates both factory bolt spacings without modification, making it the practical choice for replacements where you want to cover your bases on an older vehicle.


Key Features


Important Fitment Check

Before ordering, verify your pinion seal inner diameter is 38mm. Variations can occur on vehicles where an exchange differential or upgraded diff kit has been fitted — particularly if a later spec pinion has been installed. If your seal ID is 41mm or 45mm, you need a different flange. If in doubt, measure before you order.


Vehicle Compatibility

Suitable for Toyota Landcruiser 40 Series, built January 1974 to January 1978, including:

Fits front differential, rear differential and transfer output shaft positions.


Part Details

Detail Info
Spline Count 10 spline (coarse)
Seal OD 38mm
Bolt Pattern 68.5mm x 60mm, 11mm holes
Application Front diff, rear diff, transfer output
Build Date 01/1974 to 01/1978
商品を表示