販売およびお問い合わせ: 0415 274 753

Aftermarket Rear Door suits Toyota Landcruiser 60 Series

$560.00
税込 次精算時に配送料を算出。

This aftermarket rear door is the practical solution — rust-free, OEM-grade steel construction, primer-dipped and ready to paint.

They fit the 60 Series with the minor adjustments you'd expect from any aftermarket panel, and when painted they come up as good as anything on the vehicle.

Select Left Hand (LH) or Right Hand (RH) using the variant selector.


Key Features

  • OEM-grade steel construction — not thin imported sheet metal
  • Full primer dip process for rust protection during transport, storage and handling
  • Rust-free — no filler hiding rot, no compromises from a wrecking yard panel
  • Pre-primed and ready for top coat — paint directly or apply an additional primer coat first
  • Designed to fit the Toyota Landcruiser 60 Series rear door aperture
  • Minor fitting adjustments typical of aftermarket panels — nothing a panel beater or experienced DIYer can't handle.
  • Available in both Left Hand (LH) and Right Hand (RH) — select your side above

Vehicle Compatibility

Suitable for Toyota Landcruiser 60 Series

Always verify your exact build date and body configuration before ordering. If unsure, contact our friendly team!


What to Expect — Fitment Notes

Aftermarket panels are NOT Toyota OEM parts and are priced accordingly. Like all imported aftermarket body panels, these doors will require minor adjustment on installation — gap alignment, hinge shimming and surface prep are standard steps for any panel fitment job. The steel is OEM-grade and the primer-dip finish is solid, but you should expect to do light surface preparation before your final top coat. This is normal practice for aftermarket panel replacement and is well within the scope of a panel shop or a competent DIY restoration.

What you won't find on these doors: rust, bog, or wrecking yard mystery damage. That's the point.


Recommended Installation Process

  1. Dry-fit the door and check gap alignment before any paint work. (No returns if painted)
  2. Adjust hinges and striker as needed — minor fitting is standard
  3. Sand and prep the primed surface as needed
  4. Apply a quality primer coat if desired, then top coat to match
  5. Transfer seals, handles, glass and hardware from your existing door
Placement

安心・安全

  • American Express
  • Apple Pay
  • Bancontact
  • Google Pay
  • iDEAL Wero
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

あなたの支払い情報は安全に処理されます。当社はクレジット カードの詳細を保存せず、お客様のクレジット カード情報にアクセスすることもありません。

今すぐ購入し、Shop Pay で後で支払う

ワークショップサービス、新品および中古部品

当社のワークショップは、クラシックなランドクルーザー コミュニティに幅広いサービスを提供しており、ほぼ独占的に 40 および 60 シリーズ ランドクルーザーを扱っており、販売および購入の検査からディスク ブレーキの変換、モーターの交換、5 速変換などに至るまであらゆる作業を行っています。 Mr Landcruiser は、クラシックなランドクルーザーのワンストップ ショップです。

  • 返金保証

  • オーストラリアへの送料無料

  • 20年以上の経験

Mr Landcruiser

Aftermarket Rear Door suits Toyota Landcruiser 60 Series

$560.00

This aftermarket rear door is the practical solution — rust-free, OEM-grade steel construction, primer-dipped and ready to paint.

They fit the 60 Series with the minor adjustments you'd expect from any aftermarket panel, and when painted they come up as good as anything on the vehicle.

Select Left Hand (LH) or Right Hand (RH) using the variant selector.


Key Features


Vehicle Compatibility

Suitable for Toyota Landcruiser 60 Series

Always verify your exact build date and body configuration before ordering. If unsure, contact our friendly team!


What to Expect — Fitment Notes

Aftermarket panels are NOT Toyota OEM parts and are priced accordingly. Like all imported aftermarket body panels, these doors will require minor adjustment on installation — gap alignment, hinge shimming and surface prep are standard steps for any panel fitment job. The steel is OEM-grade and the primer-dip finish is solid, but you should expect to do light surface preparation before your final top coat. This is normal practice for aftermarket panel replacement and is well within the scope of a panel shop or a competent DIY restoration.

What you won't find on these doors: rust, bog, or wrecking yard mystery damage. That's the point.


Recommended Installation Process

  1. Dry-fit the door and check gap alignment before any paint work. (No returns if painted)
  2. Adjust hinges and striker as needed — minor fitting is standard
  3. Sand and prep the primed surface as needed
  4. Apply a quality primer coat if desired, then top coat to match
  5. Transfer seals, handles, glass and hardware from your existing door

Placement

  • Rear Left
  • Rear Right
商品を表示